Danfoss iSave 21 Service-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Service-Handbuch für Water Pump Danfoss iSave 21 herunter. Danfoss iSave 21 18 Seiten. Energy recovery device disassembling and assembling

Seite drucken

Service guide

Disassembling and assembling iSave 21

If bearing in flange need to be changed

gently press the bearing out from the

back side with a tube or a drift.

Place the new bearing in the hole in the

flange.

Gently remove the cylinder barrel.

11.

Gently remove the housing.

Note: Loose parts on the inside of the flange.

180R9219 | 521B1171 | DKCFN.PI.003.K4.02 | 03.2016

Lubricate the new bearing with clean

filtered water. With use of a hand press

gently press the new bearing in place

until it is in line with the flange surface.

Do not use a hammer!

10.

Unscrew the bolts in the flange.

12.

Remove port plate and pin.