- ページ 5

水ポンプ Danfoss iSave 21のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Danfoss iSave 21 18 ページ。 Energy recovery device disassembling and assembling

ページを印刷する
Danfoss iSave 21 サービスマニュアル
Service guide
Disassembling and assembling iSave 21
7.
If bearing in flange need to be changed
gently press the bearing out from the
back side with a tube or a drift.
Place the new bearing in the hole in the
flange.
9.
Gently remove the cylinder barrel.
11.
Gently remove the housing.
Note: Loose parts on the inside of the flange.
180R9219 | 521B1171 | DKCFN.PI.003.K4.02 | 03.2016
8.
Lubricate the new bearing with clean
filtered water. With use of a hand press
gently press the new bearing in place
until it is in line with the flange surface.
Do not use a hammer!
10.
Unscrew the bolts in the flange.
Pin
12.
Remove port plate and pin.
5