Danfoss iSave 21 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Danfoss iSave 21. Danfoss iSave 21 18 страниц. Energy recovery device disassembling and assembling
Печатать страницу
Service guide
Disassembling and assembling iSave 21
7.
If bearing in flange need to be changed
gently press the bearing out from the
back side with a tube or a drift.
Place the new bearing in the hole in the
flange.
9.
Gently remove the cylinder barrel.
11.
Gently remove the housing.
Note: Loose parts on the inside of the flange.
180R9219 | 521B1171 | DKCFN.PI.003.K4.02 | 03.2016
8.
Lubricate the new bearing with clean
filtered water. With use of a hand press
gently press the new bearing in place
until it is in line with the flange surface.
Do not use a hammer!
10.
Unscrew the bolts in the flange.
Pin
12.
Remove port plate and pin.
5