Audiotec Fischer Match M 5DSP Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Audiotec Fischer Match M 5DSP herunter. Audiotec Fischer Match M 5DSP 16 Seiten. 5-channel, with integrated dsp

Seite drucken

Initial start-up and functions

6 Control pushbutton

The control pushbutton allows the user to switch

between the two setup memory positions. To switch

between the setups the button has to be pressed

and held for 1 second. Switching is indicated by

button for 5 seconds completely erases the internal

the Status LED.

Attention: After erasing the setups from memory

the MATCH M 5DSP will not reproduce any audio

output until a new setup is loaded.

7 Remote In / Out

Remote In: The remote input has to be used to turn

on/off the M 5DSP if the signal source which is con-

nected to the highlevel inputs is not activating the

only be activated/deactivated by a remote signal

applied to the Remote In input.

Remote Out: We strongly recommend to use the

that are connected to the Line Out of the M 5DSP.

This is essential to avoid any undesired pop nois-

es during DSP boot or software update process.

Additionally this output will be turned off during the

"Power Save Mode" or a software update process.

8 Status LED

The Status LED indicates the operation mode of the

orange means that setup two is loaded.

If it lights up red constantly, the undervoltage pro-

no setup is loaded. In that case please load a new

setup via the DSP PC-Tool software.

operation can be ensured.

Status LED. Pressing the

9 Optical Input

Optical input in SPDIF format for connecting signal

sources with a digital audio output. The sampling

rate of this input must be between 6 and 96 kHz.

The input signal is automatically adjusted to the in-

ternal sample rate. In order to control the volume of

this input, we recommend to use an optional remote

control.

Notice:

signals and no Dolby-coded digital audio stream.

Control Input

This multi-functional connector is designed for

MATCH accessory products like a remote control

which allows to adjust several features of the am-

or on the remote control itself.