Audiotec Fischer Match M 5DSP Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Audiotec Fischer Match M 5DSP herunter. Audiotec Fischer Match M 5DSP 16 Seiten. 5-channel, with integrated dsp

Seite drucken

Initial start-up and functions

1 System Connector

Please use this terminal only in combination with

the cable harness that is included in delivery or an

appropriate cable from the MATCH accessories

program.

Note: Cable harnesses out of the MATCH acces-

sories program may never be used in "HighPower"

mode of the M 5DSP! A detailed description of the

"HighPower" mode can be found on page 19.

Caution: The use of other harnesses may cause

unit and your loudspeakers. In any case the war-

ranty will be void!

2 Auto Remote

The M 5DSP will be turned on automatically if the

highlevel inputs are used or if a signal is applied to

the Remote In terminal. The Auto Remote switch

allows to activate / deactivate the automatic turn-on

feature. The feature should be deactivated if there

are e.g. disturbing noises while switching on/off the

Note: If the automatic turn-on function is deactivat-

ed it is mandatory to use the Remote In terminal to

ignored in this case.

3 Line Out

The 3.5 mm Line Out is a stereo signal output with

a maximum output voltage of 3 Volts RMS for con-

ers using the remote output (Remote Out) of the

M 5DSP. Never directly control the external amps

by a signal from the ignition switch of your car!

Additionally this output will be turned off when the

Note: We recommend to use a shielded 3.5 mm

jack to RCA adapter cable to avoid any background

noises.

4 Subwoofer Output

This output provides for the connection of a passive

MATCH Plug & Play subwoofer (like the MATCH

PP 7E-D or PP 7S-D) or a conventional subwoof-

er. Use only the enclosed subwoofer cable for con-

necting a subwoofer. When using a subwoofer, we

strongly recommend to connect the M 5DSP direct-

ly to a 12 Volt source. Refer to connection instruc-

tions in section 4, page 21.

5 USB Input

Connect your personal computer to the M 5DSP us-

ing the provided USB cable.

website and download the latest version of the

DSP PC-Tool software.

Check from time to time for software updates.

manual on

We strongly recommend to carefully read the user

manual (Sound Tuning Magazine) before using the

plications and failures.

In the following the most important steps how to

1. Download

the

DSP PC-Tool software (available on our web-

site

on you computer.

the USB cable that is included in delivery. If you

have to bridge longer distances please use an

active USB extension cable with integrated re-

peater and no passive extension.

the Status LED lights up green. The operating

software will be updated automatically to the

latest version if it is not up-to-date.

software.

Interesting and useful tips can be found in our

"Sound Tuning Magazine" which can be download-

ed for free from our website.

Please note: It is not possible to connect any USB

storage devices.

Important: We highly recommend to set the vol-

ume of you car radio to minimum position during

nected to the Line Out until general settings in the

DSP PC-Tool software have been made. Especial-

ly if the M 5DSP will be used to drive fully active

speaker systems, a wrong setup can destroy your

tweeters right away.

latest

version

) and install it

the