Audiotec Fischer Match M 5DSP Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Audiotec Fischer Match M 5DSP herunter. Audiotec Fischer Match M 5DSP 16 Seiten. 5-channel, with integrated dsp

Seite drucken

Congratulations!

Dear Customer,

Congratulations on your purchase of this innovative

and high-qual ity MATCH product.

With the M 5DSP, Audiotec Fischer is setting new

General instructions

General installation instructions for MATCH

components

To prevent damage to the unit and possible injury,

read this manual carefully and follow all installation

instructions. This product has been checked for

proper function prior to shipping and is guaranteed

against manufacturing defects.

Before starting your installation, disconnect the

battery's negative terminal to prevent damage

performance and to ensure full warranty coverage,

we strongly recommend to get this product installed

by an authorized MATCH dealer.

Install your M 5DSP in a dry location with suf-

a solid mounting surface using proper mounting

hardware. Before mounting, carefully examine the

area around and behind the proposed installa-

tion location to ensure that there are no electrical

cables or components, hydraulic brake lines or any

part of the fuel tank located behind the mounting

surface. Failure to do so may result in unpredictable

damage to these components and possible costly

repairs to the vehicle.

We wish you many hours of enjoyment with your

new MATCH M 5DSP.

Yours,

AUDIOTEC FISCHER

General instructions for connecting the M 5DSP

tor vehicles which have a 12 Volts negative terminal

connected to the chassis ground. Any other system

cal system of the vehicle.

Use only the enclosed cable harness or a

PP-ISO cable for connection of the M 5DSP.

For a proper

ATTENTION: Do not use the PP-ISO cable for

connection if the "HighPower" mode is activat-

ed.

The use of the PP-ISO cable in "HighPower"

mode or other cables can result in damage of

the equipment / wiring of your vehicle!

Prior to installation, plan the wire routing to avoid

any possible damage to the wire harness. All

cabling should be protected against possible crush-

ing or pinching hazards. Also avoid routing cables

close to potential noise sources such as electric

motors, high power accessories and other vehicle

harnesses.

The fuse may only be replaced by an

identically rated fuse (30 A) to avoid damage of