DURKOPP ADLER H867 Zusätzliche Anweisungen - Seite 9
Blättern Sie online oder laden Sie pdf Zusätzliche Anweisungen für Nähmaschine DURKOPP ADLER H867 herunter. DURKOPP ADLER H867 12 Seiten. Tilting support
Seite drucken
Installing the parts set
Fig. 6: Installation III
(1) - Adjusting screw
(2) - Bolt
(3) - Lever
Handling step
1. Tilt the machine head back into the service position.
2. Use the bolt (2) to connect the lever (3), the spacer ring (8) and the
3. Fit the adjusting ring (9) onto the bolt (2) and tighten until there is no
4. Tighten the adjusting screw (1).
Fig. 7: Installation IV
(3) - Lever
(11) - Adjusting ring
(12) - Adjusting screw
Handling step
1. Tilt the machine back into the working position.
2. Use the bolt (14) to connect the lever (3) and the connecting rod (13).
3. Fit the adjusting ring (11) onto the bolt (14) and tighten until there is
4. Tighten the adjusting screw (12).
Additional Instructions H867 - 00.0 - 03/2015
③
⑧
⑨
eye of the gas spring (10).
more axial play.
⑪
⑫
③
no more axial play.
(8) - Spacer ring
(9) - Adjusting ring
(10) - Gas spring
(13) - Connecting rod
(14) - Bolt
⑩
②
①
⑭
⑬
7