DURKOPP ADLER H867 Additional Instructions - Page 9
Browse online or download pdf Additional Instructions for Sewing Machine DURKOPP ADLER H867. DURKOPP ADLER H867 12 pages. Tilting support
Print Page
Installing the parts set
Fig. 6: Installation III
(1) - Adjusting screw
(2) - Bolt
(3) - Lever
Handling step
1. Tilt the machine head back into the service position.
2. Use the bolt (2) to connect the lever (3), the spacer ring (8) and the
3. Fit the adjusting ring (9) onto the bolt (2) and tighten until there is no
4. Tighten the adjusting screw (1).
Fig. 7: Installation IV
(3) - Lever
(11) - Adjusting ring
(12) - Adjusting screw
Handling step
1. Tilt the machine back into the working position.
2. Use the bolt (14) to connect the lever (3) and the connecting rod (13).
3. Fit the adjusting ring (11) onto the bolt (14) and tighten until there is
4. Tighten the adjusting screw (12).
Additional Instructions H867 - 00.0 - 03/2015
③
⑧
⑨
eye of the gas spring (10).
more axial play.
⑪
⑫
③
no more axial play.
(8) - Spacer ring
(9) - Adjusting ring
(10) - Gas spring
(13) - Connecting rod
(14) - Bolt
⑩
②
①
⑭
⑬
7