DURKOPP ADLER H867 Petunjuk Tambahan - Halaman 9

Jelajahi secara online atau unduh pdf Petunjuk Tambahan untuk Mesin Jahit DURKOPP ADLER H867. DURKOPP ADLER H867 12 halaman. Tilting support

Installing the parts set

Fig. 6: Installation III

(1) - Adjusting screw

(2) - Bolt

(3) - Lever

Handling step

1. Tilt the machine head back into the service position.

2. Use the bolt (2) to connect the lever (3), the spacer ring (8) and the

3. Fit the adjusting ring (9) onto the bolt (2) and tighten until there is no

4. Tighten the adjusting screw (1).

Fig. 7: Installation IV

(3) - Lever

(11) - Adjusting ring

(12) - Adjusting screw

Handling step

1. Tilt the machine back into the working position.

2. Use the bolt (14) to connect the lever (3) and the connecting rod (13).

3. Fit the adjusting ring (11) onto the bolt (14) and tighten until there is

4. Tighten the adjusting screw (12).

Additional Instructions H867 - 00.0 - 03/2015

③

⑧

⑨

eye of the gas spring (10).

more axial play.

⑪

⑫

③

no more axial play.

(8) - Spacer ring

(9) - Adjusting ring

(10) - Gas spring

(13) - Connecting rod

(14) - Bolt

⑩

②

①

⑭

⑬