Datalogic CBX500 Installationshandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Installationshandbuch für Barcode-Leser Datalogic CBX500 herunter. Datalogic CBX500 16 Seiten. Scanning connection box
Auch für Datalogic CBX500: Installationshandbuch (17 seiten), Installationshandbuch (17 seiten)
Seite drucken
9-PIN READING DEVICE AUXILIARY SERIAL INTERFACE
The reading device auxiliary serial interface available on the internal CBX500 9-pin connector can be used either
for configuration or for data monitoring.
Connections can be made to a PC or Laptop using a straight through cable or a USB-RS232 converter.
The details of the connector pins are indicated in the following table:
Pin
2
3
5
1, 4, 6, 7, 8, 9
NETWORK BUS TERMINATION
The ID-NET™ termination resistance switch enables or disables the insertion of the bus termination resistor for
ID-NET™ network applications.
In ID-NET™ network applications the termination resistor must be enabled ONLY on the first
and last devices of the chain. On all the other devices this resistor MUST NOT be enabled
(OFF).
CAUTION
5
Figure 9 - 9-pin D-Sub Female Connector
9-pin Connector Pinout
Name
Function
TX
Auxiliary RS232
RX
Auxiliary RS232
SGND
Auxiliary Reference Ground
N.C.
ID-NET™
ON
OFF
Figure 10 – ID-NET™ Termination Resistance Switch
CBX500 INSTALLATION MANUAL
1
9
6
11