Datalogic CBX500 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Barcode Reader Datalogic CBX500. Datalogic CBX500 16 pages. Scanning connection box
Also for Datalogic CBX500: Installation Manual (17 pages), Installation Manual (17 pages)

Print Page

9-PIN READING DEVICE AUXILIARY SERIAL INTERFACE

The reading device auxiliary serial interface available on the internal CBX500 9-pin connector can be used either

for configuration or for data monitoring.

Connections can be made to a PC or Laptop using a straight through cable or a USB-RS232 converter.

The details of the connector pins are indicated in the following table:

1, 4, 6, 7, 8, 9

NETWORK BUS TERMINATION

The ID-NET™ termination resistance switch enables or disables the insertion of the bus termination resistor for

ID-NET™ network applications.

In ID-NET™ network applications the termination resistor must be enabled ONLY on the first

and last devices of the chain. On all the other devices this resistor MUST NOT be enabled

(OFF).

CAUTION

Figure 9 - 9-pin D-Sub Female Connector

9-pin Connector Pinout

Name

Function

Auxiliary RS232

SGND

Auxiliary Reference Ground

N.C.

ID-NET™

OFF

Figure 10 – ID-NET™ Termination Resistance Switch

CBX500 INSTALLATION MANUAL