Datalogic CBX500 Manuale di installazione - Pagina 11
Sfoglia online o scarica il pdf Manuale di installazione per Lettore di codici a barre Datalogic CBX500. Datalogic CBX500 16. Scanning connection box
Anche per Datalogic CBX500: Manuale di installazione (17 pagine), Manuale di installazione (17 pagine)
Stampa la pagina
9-PIN READING DEVICE AUXILIARY SERIAL INTERFACE
The reading device auxiliary serial interface available on the internal CBX500 9-pin connector can be used either
for configuration or for data monitoring.
Connections can be made to a PC or Laptop using a straight through cable or a USB-RS232 converter.
The details of the connector pins are indicated in the following table:
Pin
2
3
5
1, 4, 6, 7, 8, 9
NETWORK BUS TERMINATION
The ID-NET™ termination resistance switch enables or disables the insertion of the bus termination resistor for
ID-NET™ network applications.
In ID-NET™ network applications the termination resistor must be enabled ONLY on the first
and last devices of the chain. On all the other devices this resistor MUST NOT be enabled
(OFF).
CAUTION
5
Figure 9 - 9-pin D-Sub Female Connector
9-pin Connector Pinout
Name
Function
TX
Auxiliary RS232
RX
Auxiliary RS232
SGND
Auxiliary Reference Ground
N.C.
ID-NET™
ON
OFF
Figure 10 – ID-NET™ Termination Resistance Switch
CBX500 INSTALLATION MANUAL
1
9
6
11