DUSKWORK VCO V2 Handbuch erstellen - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch erstellen für Kontrolleinheit DUSKWORK VCO V2 herunter. DUSKWORK VCO V2 7 Seiten.

| DUSKWORK.NET | Self-Tuning VCO V2 Build Guide

Step 3: Next, you'll need to add 1 x 300KΩ 1/4w resistor between pins 15 + 16 of the AS3340

IC. It's important that this doesn't short anywhere else on the PCB or other components. The

best way to do this is to bend one leg against the body of the resistor to reduce the size of its

footprint. See photos below for to visualise how it should sit.

Before

After

Step 4: Now it's time to start soldering the through hole components. Start with the 2 x 10K

trim pots at the top of the board. One is to adjust the 1v reference signal, the other is to

adjust the 1v/oct CV tracking