Elsner Corlo Touch KNX Technische Daten und Installationsanweisungen - Seite 6
Blättern Sie online oder laden Sie pdf Technische Daten und Installationsanweisungen für Schalter Elsner Corlo Touch KNX herunter. Elsner Corlo Touch KNX 12 Seiten. Display and touch switch
Auch für Elsner Corlo Touch KNX: Technische Daten und Installationsanweisungen (2 seiten)
Seite drucken
When using a dual or triple frame, two or three sockets with a separation of 71 mm
must be placed accordingly. The frames must be installed vertically.
Overall dimensions with frame:
Single, approx. 80 mm x 81 mm (W x H),
Dual, approx. 80 mm x 153 mm (W x H),
Triple, approx. 80 mm x 224 mm (W x H),
Mounting depth approx. 12.5 mm
2.2.2. Assembling the frame and the display unit
The instructions show installation of display unit with a single frame. Dual and triple
frames are installed accordingly.
Display Corlo Touch KNX • Status: 06.08.13 • Technical changes and errors reserved.
6
Fig. 1: Sectional drawing.
The Display Corlo Touch KNX fits in a normal
junction box (R 60 mm, depth 42 mm).
If the analog/digital inputs are used, a deep
socket (60 mm) or an electronics socket should be
used. In this way, cables can be connected and
stowed more conveniently.
Fig. 2
A socket with 4 screw domes faciliates
installation.
Fig. 3
Bolt the frame on to the socket. Two screws
(right/left or top/bottom) are enough.
Installation and start-up