- ページ 6

スイッチ Elsner Corlo Touch KNXのPDF 技術仕様と設置手順をオンラインで閲覧またはダウンロードできます。Elsner Corlo Touch KNX 12 ページ。 Display and touch switch
Elsner Corlo Touch KNX にも：技術仕様と設置手順 (2 ページ)

ページを印刷する

When using a dual or triple frame, two or three sockets with a separation of 71 mm

must be placed accordingly. The frames must be installed vertically.

Overall dimensions with frame:

Single, approx. 80 mm x 81 mm (W x H),

Dual, approx. 80 mm x 153 mm (W x H),

Triple, approx. 80 mm x 224 mm (W x H),

Mounting depth approx. 12.5 mm

2.2.2. Assembling the frame and the display unit

The instructions show installation of display unit with a single frame. Dual and triple

frames are installed accordingly.

Display Corlo Touch KNX • Status: 06.08.13 • Technical changes and errors reserved.

Fig. 1: Sectional drawing.

The Display Corlo Touch KNX fits in a normal

junction box (R 60 mm, depth 42 mm).

If the analog/digital inputs are used, a deep

socket (60 mm) or an electronics socket should be

used. In this way, cables can be connected and

stowed more conveniently.

Fig. 2

A socket with 4 screw domes faciliates

installation.

Fig. 3

Bolt the frame on to the socket. Two screws

(right/left or top/bottom) are enough.

Installation and start-up