Elsner Corlo Touch KNX Especificações técnicas e instruções de instalação - Página 6
Procurar online ou descarregar pdf Especificações técnicas e instruções de instalação para Interruptor Elsner Corlo Touch KNX. Elsner Corlo Touch KNX 12 páginas. Display and touch switch
Também para Elsner Corlo Touch KNX: Especificações técnicas e instruções de instalação (2 páginas)
Imprimir página
When using a dual or triple frame, two or three sockets with a separation of 71 mm
must be placed accordingly. The frames must be installed vertically.
Overall dimensions with frame:
Single, approx. 80 mm x 81 mm (W x H),
Dual, approx. 80 mm x 153 mm (W x H),
Triple, approx. 80 mm x 224 mm (W x H),
Mounting depth approx. 12.5 mm
2.2.2. Assembling the frame and the display unit
The instructions show installation of display unit with a single frame. Dual and triple
frames are installed accordingly.
Display Corlo Touch KNX • Status: 06.08.13 • Technical changes and errors reserved.
6
Fig. 1: Sectional drawing.
The Display Corlo Touch KNX fits in a normal
junction box (R 60 mm, depth 42 mm).
If the analog/digital inputs are used, a deep
socket (60 mm) or an electronics socket should be
used. In this way, cables can be connected and
stowed more conveniently.
Fig. 2
A socket with 4 screw domes faciliates
installation.
Fig. 3
Bolt the frame on to the socket. Two screws
(right/left or top/bottom) are enough.
Installation and start-up