CooKing SURFACE PRIME SVIF-CK 3.0 Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld CooKing SURFACE PRIME SVIF-CK 3.0 herunter. CooKing SURFACE PRIME SVIF-CK 3.0 13 Seiten.

Seite drucken

8 - SYSTEM OPERATION

1.Operation of top left cooking zone A:

Press the "On / Off" key and then press the circular key corresponding to the top left cooking zone to start. The top left cooking

zone will switch on and heating will start automatically from the first power level; the symbol representing the top left cooking

zone will appear on the LCD display. During operation, you can select the power level by pressing the "+" key to increase the

temperature or the "-" key to decrease it. You can select from 9 different levels. The number identifying the power level will be

shown on the remote control LCD display.

2.Operation of bottom left cooking zone B:

Press the "On / Off" key and then press the circular key corresponding to the bottom left cooking zone to start. The bottom left

cooking zone will switch on and heating will start automatically from the first power level; the symbol representing the bottom

left cooking zone will appear on the LCD display. During operation, you can select the power level by pressing the "+" key to

increase the temperature or the "-" key to decrease it. You can select from 9 different levels. The number identifying the power

level will be shown on the remote control LCD display.

3.Operation of right-hand cooking zone C:

Press the "On / Off" key and then press the circular key corresponding to the right-hand cooking zone to start. The right-hand

cooking zone will switch on and heating will start automatically from the first power level; the symbol representing the right-

hand cooking zone will appear on the LCD display. During operation, you can select the power level by pressing the "+" key to

increase the temperature or the "-" key to decrease it. You can select from 9 different levels. The number identifying the power

level will be shown on the remote control LCD display.

N.B.: if more than one cooking zone is operating simultaneously, the power level of each will be shown alternately on the remote

control LCD display at 5 second intervals.

9 - ERROR CODES

E1 + Alarm:

1. No pan on the cooking zone.

2. Pan not compatible with induction cooking.

3. Pan diameter less than 12 cm.

E2 + Alarm:

Internal working temperature too high. The overheating protection system shuts off the power supply. Check that ventilation is

sufficient and wait a few minutes before restarting.

E2 + Audible alarm:

Internal working temperature too high. The overheating protection system shuts off the power supply. Check that ventilation is

sufficient and wait a few minutes before restarting.

E3 + Alarm:

Overvoltage protection tripped. The power supply has exceeded 275 V.

E4 + Alarm:

Undervoltage protection tripped. The power supply has dropped below 145V.

E5 + Alarm:

Main sensor disconnected.

E6 + Alarm:

The pan temperature is too high: the food could burn. The power supply is shut off for safety reasons. Press on/off to switch off

the hob. Wait a few minutes before restarting.

E7 + Alarm:

Communication fault between cooking sections A and B simultaneously or of section B or section A exclusively.

E8 + Alarm:

Cooking section C communication fault.

E9 + Alarm:

Bluetooth connection fault.