HHO Plus CCPWM60A Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge HHO Plus CCPWM60A herunter. HHO Plus CCPWM60A 10 Seiten. Hho hydrogen on demand dual fuel generator systems
Auch für HHO Plus CCPWM60A: Installationshandbuch (11 seiten), Installationshandbuch (12 seiten), Installationshandbuch (10 seiten)

HHO Plus CCPWM60A Installationshandbuch

4 Technical Specifications

Technical Specifications
 Direct connection from Battery
Direct connection from Battery and Input to HHO CELL generator, without external relays;
 60A Max Powersupply;
 LCD Module Monochrome Display Screen:
LCD Module Monochrome Display Screen:Voltmeter + Ammeter + Cell Charge information
 Automatic detection of battery voltage and auto configuration for: +12V/+24V power supply;
 Quad operational chip sensor with
Quad operational chip sensor with 1% tolerance Zenner voltage detector;
 Auto power ON when the Engine is running;
Auto power ON when the Engine is running;
 3 Seconds delay PWM control, after Engine ON is detected;
delay PWM control, after Engine ON is detected;
 Auto Power OFF when Engine is turned OFF;
Auto Power OFF when Engine is turned OFF;
 Soft PWM startup to the max Ampere out power supply;
Soft PWM startup to the max Ampere out power supply;
 Embedded trimmer for PWM control: from 0% to 100% HHO CELL power supply;
 Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
 Embedded 3 way power barrier: Positive, G
way power barrier: Positive, Ground, Negative from Cell (CELL
 Optional Water tank sensor switch embedded on system
Optional Water tank sensor switch embedded on system;
 Frequency: 36kHz
Water Level Sensor
battery voltage and auto configuration for: +12V/+24V power supply;
battery voltage and auto configuration for: +12V/+24V power supply;
M control: from 0% to 100% HHO CELL power supply;
M control: from 0% to 100% HHO CELL power supply;
CCPWM60A – Installation Manual
Installation Manual
without external relays;
+ Cell Charge information;
Electric cables
Edit Buttons
Edit Buttons
ELL – OUT);
4