HHO Plus CCPWM60A Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HHO Plus CCPWM60A. HHO Plus CCPWM60A 10 pages. Hho hydrogen on demand dual fuel generator systems
Également pour HHO Plus CCPWM60A : Manuel d'installation (11 pages), Manuel d'installation (12 pages), Manuel d'installation (10 pages)

Imprimer la page

4 Technical Specifications

Technical Specifications

 Direct connection from Battery

Direct connection from Battery and Input to HHO CELL generator, without external relays;

 60A Max Powersupply;

 LCD Module Monochrome Display Screen:

LCD Module Monochrome Display Screen:Voltmeter + Ammeter + Cell Charge information

 Automatic detection of battery voltage and auto configuration for: +12V/+24V power supply;

 Quad operational chip sensor with

Quad operational chip sensor with 1% tolerance Zenner voltage detector;

 Auto power ON when the Engine is running;

Auto power ON when the Engine is running;

 3 Seconds delay PWM control, after Engine ON is detected;

delay PWM control, after Engine ON is detected;

 Auto Power OFF when Engine is turned OFF;

Auto Power OFF when Engine is turned OFF;

 Soft PWM startup to the max Ampere out power supply;

Soft PWM startup to the max Ampere out power supply;

 Embedded trimmer for PWM control: from 0% to 100% HHO CELL power supply;

 Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;

Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;

 Embedded 3 way power barrier: Positive, G

way power barrier: Positive, Ground, Negative from Cell (CELL

 Optional Water tank sensor switch embedded on system

Optional Water tank sensor switch embedded on system;

 Frequency: 36kHz

Water Level Sensor

battery voltage and auto configuration for: +12V/+24V power supply;

M control: from 0% to 100% HHO CELL power supply;

CCPWM60A – Installation Manual

Installation Manual

without external relays;

+ Cell Charge information;

Electric cables

Edit Buttons

ELL – OUT);