HHO Plus CCPWM60A Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HHO Plus CCPWM60A. HHO Plus CCPWM60A 10 pagina's. Hho hydrogen on demand dual fuel generator systems
Ook voor HHO Plus CCPWM60A: Installatiehandleiding (11 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (10 pagina's)

HHO Plus CCPWM60A Installatiehandleiding

4 Technical Specifications

Technical Specifications
 Direct connection from Battery
Direct connection from Battery and Input to HHO CELL generator, without external relays;
 60A Max Powersupply;
 LCD Module Monochrome Display Screen:
LCD Module Monochrome Display Screen:Voltmeter + Ammeter + Cell Charge information
 Automatic detection of battery voltage and auto configuration for: +12V/+24V power supply;
 Quad operational chip sensor with
Quad operational chip sensor with 1% tolerance Zenner voltage detector;
 Auto power ON when the Engine is running;
Auto power ON when the Engine is running;
 3 Seconds delay PWM control, after Engine ON is detected;
delay PWM control, after Engine ON is detected;
 Auto Power OFF when Engine is turned OFF;
Auto Power OFF when Engine is turned OFF;
 Soft PWM startup to the max Ampere out power supply;
Soft PWM startup to the max Ampere out power supply;
 Embedded trimmer for PWM control: from 0% to 100% HHO CELL power supply;
 Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery;
 Embedded 3 way power barrier: Positive, G
way power barrier: Positive, Ground, Negative from Cell (CELL
 Optional Water tank sensor switch embedded on system
Optional Water tank sensor switch embedded on system;
 Frequency: 36kHz
Water Level Sensor
battery voltage and auto configuration for: +12V/+24V power supply;
battery voltage and auto configuration for: +12V/+24V power supply;
M control: from 0% to 100% HHO CELL power supply;
M control: from 0% to 100% HHO CELL power supply;
CCPWM60A – Installation Manual
Installation Manual
without external relays;
+ Cell Charge information;
Electric cables
Edit Buttons
Edit Buttons
ELL – OUT);
4