Gage Bilt GB704 Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für Nietwerkzeuge Gage Bilt GB704 herunter. Gage Bilt GB704 13 Seiten. Installation tool
Auch für Gage Bilt GB704: Handbuch (14 seiten), Original-Bedienungsanleitung (20 seiten)

Seite drucken
Gage Bilt GB704 Installationshandbuch
HEAD
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy (704108).
WARNING:
Dispose of hydraulic oil in accordance with applicable regulations.
Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704108). Be careful not
to damage threads or cause burrs on polished piston surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the
button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
GB704 S/N: 3213 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
6/11 Rev. 9/14