Gage Bilt GB704 Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Keling Gage Bilt GB704. Gage Bilt GB704 13 halaman. Installation tool
Juga untuk Gage Bilt GB704: Manual (14 halaman), Manual Petunjuk Asli (20 halaman)

Halaman Cetak
Gage Bilt GB704 Panduan Instalasi
HEAD
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy (704108).
WARNING:
Dispose of hydraulic oil in accordance with applicable regulations.
Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704108). Be careful not
to damage threads or cause burrs on polished piston surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the
button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
GB704 S/N: 3213 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
6/11 Rev. 9/14