- ページ 9

リベット工具 Gage Bilt GB704のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB704 13 ページ。 Installation tool
Gage Bilt GB704 にも：マニュアル (14 ページ), オリジナル取扱説明書 (20 ページ)

ページを印刷する

HEAD

Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy (704108).

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704108). Be careful not

to damage threads or cause burrs on polished piston surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the

button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

GB704 S/N: 3213 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

6/11 Rev. 9/14