ActiveAid 600 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung ActiveAid 600 herunter. ActiveAid 600 19 Seiten.

22. Loosen then remove the self-locking nut, plastic

washer and machine screw that are in the chair frame

where the back assembly will be attached.

23. Install the back assembly by placing the push handles

onto the upper rear tubes of the chair frame.

24. With the plastic washer on the screw, re-insert the

screw through the holes in the chair frame and push

handles.

Note: Screw head should be to the outside of the frame and

the nut to the inside. Hand start the nut onto the end of the

screw. Use a wrench and hex key to tighten the back into

place.

Remove