ActiveAid 600 소유자 매뉴얼 - 페이지 13

{카테고리_이름} ActiveAid 600에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ActiveAid 600 19 페이지.

22. Loosen then remove the self-locking nut, plastic

washer and machine screw that are in the chair frame

where the back assembly will be attached.

23. Install the back assembly by placing the push handles

onto the upper rear tubes of the chair frame.

24. With the plastic washer on the screw, re-insert the

screw through the holes in the chair frame and push

handles.

Note: Screw head should be to the outside of the frame and

the nut to the inside. Hand start the nut onto the end of the

screw. Use a wrench and hex key to tighten the back into

place.

Remove