ActiveAid 600 Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Medis ActiveAid 600. ActiveAid 600 19 halaman.

22. Loosen then remove the self-locking nut, plastic
washer and machine screw that are in the chair frame
where the back assembly will be attached.
23. Install the back assembly by placing the push handles
onto the upper rear tubes of the chair frame.
24. With the plastic washer on the screw, re-insert the
screw through the holes in the chair frame and push
handles.
Note: Screw head should be to the outside of the frame and
the nut to the inside. Hand start the nut onto the end of the
screw. Use a wrench and hex key to tighten the back into
place.
Remove
Remove
10