Celect CC852KIT Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Thermostat Celect CC852KIT herunter. Celect CC852KIT 10 Seiten. Rf programmable thermostat
Seite drucken3. Receiver Address Accessing
1. Pull out the door by using a screwdriver.
2. Set the RF address. The receiver RF address must
match the transmitter RF address.
3. Close and press the door until hearing a "click" sound.
Warning: Disconnect from supply before
opening the door.
Upper Position: 1
lower Position: 0
e.g
Address: 11110011
low position.
5
H. Internal Setting Mode:
Hold
and
key to enter internal setting.
Press
or
to switch items and adjust value.
Press
for item selection and confirm.
Press
to exit the setting.
System Mode:
HE – Heat mode (default)
CL – Cool mode
Display Unit:
12 – 12 hour display unit
24 – 24 hour display unit (default)
Minimum Off Delay:
Sd – Short delay (default)
Ld – Long delay - 5 min.
Temperature Calibration:
-3 - 3℃.
0℃(default)
RF Address
00000000 – 11111111 (default)
14