HiBoost F10G-CP Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Signalverstärker HiBoost F10G-CP herunter. HiBoost F10G-CP 20 Seiten. Cellular 3g signal booster

(feedback) you want to ensure that there is enough separation between 
the distribution and signal antenna or that they are shielded from each 
other to ensure the distribution antenna does not send a signal back into 
the  signal  antenna.  If  you  cannot  achieve  these  separations,  either 
choose  an  alternate  location  for  the  donor  (outdoor)  antenna  or 
determine if there are natural barriers in the building construction itself 
that will attenuate signals between the two antennas so that oscillation 
can be prevented. 
3.4 Run coaxial cable
Loosely run the coaxial cable from your outdoor antenna to your booster. 
(After  you  have  tested  the  system  you  can  permanently  secure  the 
coaxial cable). 
 
As you route and pull cabling, follow these general guidelines: 
 Bend  cables  and  route  them  smoothly,  and  protect  the  outer  skin 
against any damage. 
 Keep horizontal cables straight and fasten them with a tie every three 
to five feet. 
 Bind and fasten vertical cables every six to eight feet. 
 Waterproof all outdoor connections with silicone caulking 
 Be careful when plugging the connector in so as not to damage the