HiBoost F10G-CP 사용자 설명서 - 페이지 8
{카테고리_이름} HiBoost F10G-CP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HiBoost F10G-CP 20 페이지. Cellular 3g signal booster
페이지 인쇄(feedback) you want to ensure that there is enough separation between
the distribution and signal antenna or that they are shielded from each
other to ensure the distribution antenna does not send a signal back into
the signal antenna. If you cannot achieve these separations, either
choose an alternate location for the donor (outdoor) antenna or
determine if there are natural barriers in the building construction itself
that will attenuate signals between the two antennas so that oscillation
can be prevented.
3.4 Run coaxial cable
Loosely run the coaxial cable from your outdoor antenna to your booster.
(After you have tested the system you can permanently secure the
coaxial cable).
As you route and pull cabling, follow these general guidelines:
Bend cables and route them smoothly, and protect the outer skin
against any damage.
Keep horizontal cables straight and fasten them with a tie every three
to five feet.
Bind and fasten vertical cables every six to eight feet.
Waterproof all outdoor connections with silicone caulking
Be careful when plugging the connector in so as not to damage the