HiBoost F10G-CP Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat sinyal HiBoost F10G-CP. HiBoost F10G-CP 20 halaman. Cellular 3g signal booster

(feedback) you want to ensure that there is enough separation between

the distribution and signal antenna or that they are shielded from each

other to ensure the distribution antenna does not send a signal back into

the signal antenna. If you cannot achieve these separations, either

choose an alternate location for the donor (outdoor) antenna or

determine if there are natural barriers in the building construction itself

that will attenuate signals between the two antennas so that oscillation

can be prevented.

3.4 Run coaxial cable

Loosely run the coaxial cable from your outdoor antenna to your booster.

(After you have tested the system you can permanently secure the

coaxial cable).

As you route and pull cabling, follow these general guidelines:

 Bend cables and route them smoothly, and protect the outer skin

against any damage.

 Keep horizontal cables straight and fasten them with a tie every three

to five feet.

 Bind and fasten vertical cables every six to eight feet.

 Waterproof all outdoor connections with silicone caulking

 Be careful when plugging the connector in so as not to damage the