galant 6160EX Gebrauchsanweisung - Seite 13

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Tastenfeld galant 6160EX herunter. galant 6160EX 18 Seiten.

6. After second double beep the card has been added successfully.

Note:

If at any time a triple bleep is heard, the learn procedure has

failed.

Removing Keytags

Any keytag can be removed from the system as follows:

Enter master user code, 8 (CODE), and user number (1-8).

Wait a couple of seconds for a double beep.

Press *. A double beep confirms deletion.

Adding and Changing User Codes

The system can support up to 8 User Codes. User number 1 is the

Master Code. Users 2 to 8 are normal User Codes. The Master Code

can alter the 4-digit code for itself and other User Codes, and add new

User Codes. Normal Users can only change their own code.

To change or add a user code:

Enter master user code or the user code to be deleted

Press 8 (CODE).

Press the user number that you want to program (1 to 8).

Enter the new 4-digit code. A double beep confirms the code

change.

To delete a user code:

Type in the master user code or the User Code to be deleted.

Press 8 (CODE).

Press the user number to be deleted (2 to 8).

Press *. A double beep confirms deletion.

Note: The Master Code cannot be deleted.

Duress Code

The Installer can enable user 8 as a Duress code. If this is has been

enabled, the User 8 Code can set and unset the system normally. This

only difference is that a Duress signal will be transmitted to the

monitoring station each time that it is entered. No audible or visible

indication will be given.