galant 6160EX Istruzioni per l'utente - Pagina 13

Sfoglia online o scarica il pdf Istruzioni per l'utente per Tastiera galant 6160EX. galant 6160EX 18.

6. After second double beep the card has been added successfully.

Note:

If at any time a triple bleep is heard, the learn procedure has

failed.

Removing Keytags

Any keytag can be removed from the system as follows:

Enter master user code, 8 (CODE), and user number (1-8).

Wait a couple of seconds for a double beep.

Press *. A double beep confirms deletion.

Adding and Changing User Codes

The system can support up to 8 User Codes. User number 1 is the

Master Code. Users 2 to 8 are normal User Codes. The Master Code

can alter the 4-digit code for itself and other User Codes, and add new

User Codes. Normal Users can only change their own code.

To change or add a user code:

Enter master user code or the user code to be deleted

Press 8 (CODE).

Press the user number that you want to program (1 to 8).

Enter the new 4-digit code. A double beep confirms the code

change.

To delete a user code:

Type in the master user code or the User Code to be deleted.

Press 8 (CODE).

Press the user number to be deleted (2 to 8).

Press *. A double beep confirms deletion.

Note: The Master Code cannot be deleted.

Duress Code

The Installer can enable user 8 as a Duress code. If this is has been

enabled, the User 8 Code can set and unset the system normally. This

only difference is that a Duress signal will be transmitted to the

monitoring station each time that it is entered. No audible or visible

indication will be given.