galant 6160EX User Instructions - Page 13

Browse online or download pdf User Instructions for Keypad galant 6160EX. galant 6160EX 18 pages.

Print Page
6. After second double beep the card has been added successfully.
Note:
If at any time a triple bleep is heard, the learn procedure has
failed.
Removing Keytags
Any keytag can be removed from the system as follows:
1.
Enter master user code, 8 (CODE), and user number (1-8).
2.
Wait a couple of seconds for a double beep.
3.
Press *. A double beep confirms deletion.

Adding and Changing User Codes

The system can support up to 8 User Codes. User number 1 is the
Master Code. Users 2 to 8 are normal User Codes. The Master Code
can alter the 4-digit code for itself and other User Codes, and add new
User Codes. Normal Users can only change their own code.
To change or add a user code:
1.
Enter master user code or the user code to be deleted
2.
Press 8 (CODE).
3.
Press the user number that you want to program (1 to 8).
4.
Enter the new 4-digit code. A double beep confirms the code
change.
To delete a user code:
1.
Type in the master user code or the User Code to be deleted.
2.
Press 8 (CODE).
3.
Press the user number to be deleted (2 to 8).
4.
Press *. A double beep confirms deletion.
Note: The Master Code cannot be deleted.
Duress Code
The Installer can enable user 8 as a Duress code. If this is has been
enabled, the User 8 Code can set and unset the system normally. This
only difference is that a Duress signal will be transmitted to the
monitoring station each time that it is entered. No audible or visible
indication will be given.
13