HighPoint RocketU 1388D Handbuch zur Schnellinstallation - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für PCI-Karte HighPoint RocketU 1388D herunter. HighPoint RocketU 1388D 12 Seiten. Pcie 3.0 to 8-port usb-c 3.2 10gb/s hba

Seite drucken

Verifying Installation (Linux)

1.
Open terminal and enter the following command:
lspci
2.
If the driver is installed properly, four "ASM2142 USB 3.1 Host
Controller" entry should be displayed.
Note: USB3.1 has been renamed to USB3.2, but the system display
has not been updated to USB3.2, the current display is still USB3.1

Connecting USB Storage Devices

1. Power on the system.
2. Connect the USB device to the HighPoint RocketU HBA with a USB
cable.
3. For hard drives or enclosures, allow the device to spin up for a few
moments. Once the devices are ready, they will be recognized by the
operating system and can be accessed as needed.
9