HighPoint RocketU 1388D Panduan Instalasi Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kartu PCI HighPoint RocketU 1388D. HighPoint RocketU 1388D 12 halaman. Pcie 3.0 to 8-port usb-c 3.2 10gb/s hba

Halaman Cetak

Verifying Installation (Linux)

Open terminal and enter the following command:

lspci

If the driver is installed properly, four "ASM2142 USB 3.1 Host

Controller" entry should be displayed.

Note: USB3.1 has been renamed to USB3.2, but the system display

has not been updated to USB3.2, the current display is still USB3.1

Connecting USB Storage Devices

1. Power on the system.

2. Connect the USB device to the HighPoint RocketU HBA with a USB

cable.

3. For hard drives or enclosures, allow the device to spin up for a few

moments. Once the devices are ready, they will be recognized by the

operating system and can be accessed as needed.