AgTerra SprayLogger E3 Installations- und Schnellstarthandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installations- und Schnellstarthandbuch für Landwirtschaftliche Geräte AgTerra SprayLogger E3 herunter. AgTerra SprayLogger E3 16 Seiten.
Seite druckeno If the SprayLogger unit is kept in a vehicle or container, check to verify that
the Bluetooth range is sufficient to stay connected to your device, and that
the GPS coordinates are accurate.
Connect your flow sensor to your SprayLogger E3 box using the 6-pin yellow
cable. The female end (green) connects to the flow sensor; the 6-pin male end
connects to a flow port on the SprayLogger. The cables may be clipped for
optimum length. If your cabling is too short, longer cables are available from
AgTerra.
Note, the cables for the flow sensors and switches look alike, as do their
ports on the SprayLogger box. Unless you have a custom configuration, flow
ports are labeled A, B and C on the box and the switch ports are labeled 1 –
15. Flow sensor cables (6-pin) will fit flow sensor ports, and only switch port
cables (3-pin) will fit switch ports. Contact AgTerra if you need additional
Switches Installation
1) If your SprayLogger E3 includes optional switch channels, use the 3-C yellow
cable(s) included in your shipment.
See the wiring diagram on the next page for additional information.
7
cables or extensions.