AgTerra SprayLogger E3 Kurulum ve Hızlı Başlangıç Kılavuzu - Sayfa 8

Çiftlik Ekipmanları AgTerra SprayLogger E3 için çevrimiçi göz atın veya pdf Kurulum ve Hızlı Başlangıç Kılavuzu indirin. AgTerra SprayLogger E3 16 sayfaları.

Sayfayı Yazdır

o If the SprayLogger unit is kept in a vehicle or container, check to verify that

the Bluetooth range is sufficient to stay connected to your device, and that

the GPS coordinates are accurate.

 Connect your flow sensor to your SprayLogger E3 box using the 6-pin yellow

cable. The female end (green) connects to the flow sensor; the 6-pin male end

connects to a flow port on the SprayLogger. The cables may be clipped for

optimum length. If your cabling is too short, longer cables are available from

AgTerra.

Note, the cables for the flow sensors and switches look alike, as do their

ports on the SprayLogger box. Unless you have a custom configuration, flow

ports are labeled A, B and C on the box and the switch ports are labeled 1 –

15. Flow sensor cables (6-pin) will fit flow sensor ports, and only switch port

cables (3-pin) will fit switch ports. Contact AgTerra if you need additional

Switches Installation

1) If your SprayLogger E3 includes optional switch channels, use the 3-C yellow

cable(s) included in your shipment.

See the wiring diagram on the next page for additional information.

cables or extensions.