Bristan 1500 Installationsanleitung und Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationsanleitung und Benutzerhandbuch für Armaturen für das Badezimmer Bristan 1500 herunter. Bristan 1500 16 Seiten. Thermostatic power shower
Seite drucken
- 1. Table of Contents
- 2. Important Safety Information
- 3. Product Features
- 4. Electrical Requirements
- 5. Water Requirements
- 6. Fitting Your Shower
- 7. Fitting the Riser Rail
- 8. Commissioning - Testing the System
- 9. Operating the Shower
- 10. Adjusting the Showerhead
- 11. Cleaning & Maintenance
- 12. Troubleshooting
- 13. Spare Parts
- 14. Guarantee
- 15. Service Policy
Fitting your Riser Rail
3.Insert rail clamps
Insert the rail clamps into both wall brackets, ensuring the screw is
accessable .
4. Insert riser rail
Push the riser rail up through the bottom wall bracket.
Push the soap dish and slider down onto the riser, ensuring they are
the correct way up.
Then push the top wall bracket down onto the riser rail.
5. Tighten rail clamps
Centre the riser rail within the wall brackets and tighten both
clamps onto the rail.
6. Fit wall bracket fixings
Position the wall bracket fixings onto the wall surface and mark the
position. Drill suitable holes and insert the wall plugs. Secure the
wall bracket fixings to the wall using the screws provided.
7. Fit riser rail to the wall
Slide the wall brackets over the wall bracket fixings. Tighten the
grub screw on the under side of each wall bracket using a 2.5mm
hexagonal key.
8. Connect shower hose to shower
Screw the shower hose (ribbed nut end) onto the shower ensuring
that the rubber washer is fitted and feed the hose through the hole
in the soap dish.
9. Connect shower hose to showerhead
Screw the shower hose (conical end) onto the showerhead ensuring
that the rubber washer is fitted.
Place the showerhead into the slider.
10
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.
Rail clamp
Bottom wall
bracket
Slider
bracket
Top wall
bracket