Bristan 1500 설치 지침 및 사용자 설명서 - 페이지 10

{카테고리_이름} Bristan 1500에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan 1500 16 페이지. Thermostatic power shower

Fitting your Riser Rail

3.Insert rail clamps

Insert the rail clamps into both wall brackets, ensuring the screw is

accessable .

4. Insert riser rail

Push the riser rail up through the bottom wall bracket.

Push the soap dish and slider down onto the riser, ensuring they are

the correct way up.

Then push the top wall bracket down onto the riser rail.

5. Tighten rail clamps

Centre the riser rail within the wall brackets and tighten both

clamps onto the rail.

6. Fit wall bracket fixings

Position the wall bracket fixings onto the wall surface and mark the

position. Drill suitable holes and insert the wall plugs. Secure the

wall bracket fixings to the wall using the screws provided.

7. Fit riser rail to the wall

Slide the wall brackets over the wall bracket fixings. Tighten the

grub screw on the under side of each wall bracket using a 2.5mm

hexagonal key.

8. Connect shower hose to shower

Screw the shower hose (ribbed nut end) onto the shower ensuring

that the rubber washer is fitted and feed the hose through the hole

in the soap dish.

9. Connect shower hose to showerhead

Screw the shower hose (conical end) onto the showerhead ensuring

that the rubber washer is fitted.

Place the showerhead into the slider.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.

Rail clamp

Bottom wall

bracket

Slider

bracket

Top wall

bracket