Major Manufacturing HIT-66-240 Anleitung Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Schlösser Major Manufacturing HIT-66-240 herunter. Major Manufacturing HIT-66-240 7 Seiten. Template for mortise lock
Seite druckenUsing a 1-1/8" hole
saw, drill the hole for
the lock spindle. It is
drilled to the mortise
cavity.
If your mortise lock installation required
an inside thumb turn, use a 1/2" twist drill
and drill the required hole on the inside
of the door only.
Use a 1-1/4" hole
saw to drill the
mortise cylinder hole
on the outside of the
door. When all holes
have been drilled,
remove the HIT-66
drill guide from the
door. This is a prep
for a Falcon MA
series mortise lock
with rose trim. If in-
stalling escutcheon
trim see next page.
PAGE 5