Major Manufacturing HIT-66-240 Manuel d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Major Manufacturing HIT-66-240. Major Manufacturing HIT-66-240 7 pages. Template for mortise lock

Imprimer la page

Using a 1-1/8" hole

saw, drill the hole for

the lock spindle. It is

drilled to the mortise

cavity.

If your mortise lock installation required

an inside thumb turn, use a 1/2" twist drill

and drill the required hole on the inside

of the door only.

Use a 1-1/4" hole

saw to drill the

mortise cylinder hole

on the outside of the

door. When all holes

have been drilled,

remove the HIT-66

drill guide from the

door. This is a prep

for a Falcon MA

series mortise lock

with rose trim. If in-

stalling escutcheon

trim see next page.

PAGE 5