Major Manufacturing HIT-66-240 Manuale di istruzioni - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per Serrature Major Manufacturing HIT-66-240. Major Manufacturing HIT-66-240 7. Template for mortise lock
Stampa la paginaUsing a 1-1/8" hole
saw, drill the hole for
the lock spindle. It is
drilled to the mortise
cavity.
If your mortise lock installation required
an inside thumb turn, use a 1/2" twist drill
and drill the required hole on the inside
of the door only.
Use a 1-1/4" hole
saw to drill the
mortise cylinder hole
on the outside of the
door. When all holes
have been drilled,
remove the HIT-66
drill guide from the
door. This is a prep
for a Falcon MA
series mortise lock
with rose trim. If in-
stalling escutcheon
trim see next page.
PAGE 5