Major Manufacturing HIT-66-274 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Drehmaschine Major Manufacturing HIT-66-274 herunter. Major Manufacturing HIT-66-274 10 Seiten. Template for sargent “in” series cylindrical lock

Seite drucken

The wire raceway will

also require a longer

than normal drill bit.

This is a 1/2"

diameter bit 12 inches

long.

Shown at right is a

pilot hole for the bit

which is only drilled

1/2" deep into the

door, not all the way

through.

Drill the raceway hole to

the cross bore. The drill bit

must be pulled completely

out of the drill bushing

when drilling to clear chips.

This is important when

drilling this deep of a hole.

Major Manufacturing Inc

PAGE 8