Major Manufacturing HIT-66-274 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Tokarka Major Manufacturing HIT-66-274. Major Manufacturing HIT-66-274 10 stron. Template for sargent “in” series cylindrical lock
Drukuj stronęThe wire raceway will
also require a longer
than normal drill bit.
This is a 1/2"
diameter bit 12 inches
long.
Shown at right is a
pilot hole for the bit
which is only drilled
1/2" deep into the
door, not all the way
through.
Drill the raceway hole to
the cross bore. The drill bit
must be pulled completely
out of the drill bushing
when drilling to clear chips.
This is important when
drilling this deep of a hole.
Copyright 2016
Major Manufacturing Inc
PAGE 8