Major Manufacturing HIT-66-274 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Torno Major Manufacturing HIT-66-274. Major Manufacturing HIT-66-274 10 páginas. Template for sargent “in” series cylindrical lock

Imprimir página

The wire raceway will

also require a longer

than normal drill bit.

This is a 1/2"

diameter bit 12 inches

long.

Shown at right is a

pilot hole for the bit

which is only drilled

1/2" deep into the

door, not all the way

through.

Drill the raceway hole to

the cross bore. The drill bit

must be pulled completely

out of the drill bushing

when drilling to clear chips.

This is important when

drilling this deep of a hole.

Major Manufacturing Inc

PAGE 8