Garage1217 project kameleon Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Docking-Station Garage1217 project kameleon herunter. Garage1217 project kameleon 11 Seiten.

Seite drucken

Project

Kameleon

STEP 2: POPULATE ALL MID & LARGE SIZE COMPONENTS SUCH AS

RCA S, POWER COMPONENTS, SMALL CAPACITORS, RELAY, AND

SO FORTH

WHEN INSTALLING TO-220

DEVICES, INSERT INTO PCB

UNTIL THEY STOP. THEN

BEND OVER EACH DEVICE

AND THEY WILL LINE UP

PERFECTLY WITH THE PCB

OUTLINE AND HOLE

POLARIZED CAPACITORS MUST BE INSTALLED IN THE

CORRECT DIRECTION (WILL HAVE A STRIPE DOWN THE SIDE

DESIGNATING POLARITY) INSTALL THIS STRIPE FACING THE

FLAT SPOT ON THE CAPACITOR OUTLINE ON THE BOARD

CORRECT

PLEASE NOTE: CENTER

PIN OF DC SOCKETS ARE

POSITIVE 24-48V

INCORRECT

BOLT DOWN BOTH TO-220

DEVICES USING SUPPLIED

4-40 ALLEN BOLT AND NUT

PCB