Garage1217 project kameleon Kullanıcı Kılavuzu - Sayfa 6
Yerleştirme İstasyonu Garage1217 project kameleon için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Garage1217 project kameleon 11 sayfaları.
Sayfayı YazdırProject
Kameleon
STEP 2: POPULATE ALL MID & LARGE SIZE COMPONENTS SUCH AS
RCA S, POWER COMPONENTS, SMALL CAPACITORS, RELAY, AND
SO FORTH
WHEN INSTALLING TO-220
DEVICES, INSERT INTO PCB
UNTIL THEY STOP. THEN
BEND OVER EACH DEVICE
AND THEY WILL LINE UP
PERFECTLY WITH THE PCB
OUTLINE AND HOLE
POLARIZED CAPACITORS MUST BE INSTALLED IN THE
CORRECT DIRECTION (WILL HAVE A STRIPE DOWN THE SIDE
DESIGNATING POLARITY) INSTALL THIS STRIPE FACING THE
FLAT SPOT ON THE CAPACITOR OUTLINE ON THE BOARD
CORRECT
PLEASE NOTE: CENTER
PIN OF DC SOCKETS ARE
POSITIVE 24-48V
INCORRECT
BOLT DOWN BOTH TO-220
DEVICES USING SUPPLIED
4-40 ALLEN BOLT AND NUT
PCB