Garage1217 project kameleon 사용자 설명서 - 페이지 6

{카테고리_이름} Garage1217 project kameleon에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garage1217 project kameleon 11 페이지.

Project

Kameleon

STEP 2: POPULATE ALL MID & LARGE SIZE COMPONENTS SUCH AS

RCA S, POWER COMPONENTS, SMALL CAPACITORS, RELAY, AND

SO FORTH

WHEN INSTALLING TO-220

DEVICES, INSERT INTO PCB

UNTIL THEY STOP. THEN

BEND OVER EACH DEVICE

AND THEY WILL LINE UP

PERFECTLY WITH THE PCB

OUTLINE AND HOLE

POLARIZED CAPACITORS MUST BE INSTALLED IN THE

CORRECT DIRECTION (WILL HAVE A STRIPE DOWN THE SIDE

DESIGNATING POLARITY) INSTALL THIS STRIPE FACING THE

FLAT SPOT ON THE CAPACITOR OUTLINE ON THE BOARD

CORRECT

PLEASE NOTE: CENTER

PIN OF DC SOCKETS ARE

POSITIVE 24-48V

INCORRECT

BOLT DOWN BOTH TO-220

DEVICES USING SUPPLIED

4-40 ALLEN BOLT AND NUT

PCB