Icon
Description
The EC500 feature is on.
Indicates that the call is using a
wideband codec for excellent voice
quality.
Indicates a low network performance
or presence of local network issues
that might result in lower call quality.
Indicates that the user enabled the
Limit Number of Concurrent Calls
(LNCC) feature.
User can enable LimitInCalls on the
Features screen to control the number
of concurrent incoming calls, and to
change Multiple Call Appearance
phone to a Single Call Appearance
phone. If the user receives an
incoming call when the LNCC feature
is active and the user is already on a
call, the caller gets the busy tone.
Indicates that the SLA Mon
has taken control of the phone.
Indicates that the call is being
recorded for SLA Mon
Indicates that the end to end call is
secured.
Indicates that the ringtone is off.
Indicates Guest login.
Wi-Fi icons
Note:
J169 phone does not supports Wi-Fi feature.
Icon
Wi-Fi Status
Wi-Fi connected
Icon
Entering the file server address
Use this procedure to enter the file server address if the
phone prompts. For example, when you connect the
phone to the network for the first time.
Get the file server address from the system administrator.
1. To open the Auto Provisioning screen, press one of
the following:
• Yes: Connects to the DES server.
• No: Connects to the DHCP server.
™
agent
In case of a time out, the phone selects Yes.
2. (Optional) If the DES server does not provide the file
server address, the phone queries the DHCP server
for the file server address.
™
.
3. (Optional) If the DHCP server does not provide the
file server address, the phone displays Enter the file
server address screen.
4. Press one of the following:
• Config: To enter the file server address.
• Never: To never prompt for the file server address.
• Cancel: To cancel the prompt and display the Log
Out screen.
5. In the Address field, enter the file server address.
The address can be in the form of a numerical IP
address or an alphanumeric Fully Qualified Domain
Name (FQDN).
Tip:
To enter the dot symbol (.) in the field, press the
alphanumeric softkey to toggle to the
Description
alphanumeric mode.
Indicates that the
6. Press Save.
phone is
The phone restarts.
connected to an
unsecured
wireless network.
Table continues...
Wi-Fi Status
Description
Wi-Fi connected
Indicates that the
phone is
connected to a
secured wireless
network.
No Wi-Fi signal
Indicates that
there is no
wireless network
available
Call operations
Making a call using speed dial
Assign speed dial numbers to your contacts.
Press and hold the dial pad key assigned to the
number you want to call.
Making an emergency call
Ensure that the feature is activated by the administrator.
Do one of the following:
• On the Phone screen, press the Emerg softkey,
and again press Emerg when the phone prompts
you for confirmation.
• Dial the emergency number by using the dial pad.
Answering a call when on another call
Press one of the following:
• The Answer softkey
• OK
The phone puts the first call on hold and moves to the
second call.
Adding a person to an active call
Use this procedure to add participants to an active call to
set up a conference call.
Start a call.
1. During a call, on the Phone screen, press More >
Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone number by using the dial pad.
• Call the person from the Recents list.
• Redial the last dialed number by using the Redial
softkey.
3. When the third participant answers the call, press the
Join softkey.
4. To add another person, press Add and repeat Step 2
and 3.
Viewing call history details
You can view following details of each call:
• Incoming call icon
• Outgoing call icon
• Missed call icon
• Call type (incoming, outgoing, missed)
2
Seite drucken