Garmin 500W Series Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für GPS Garmin 500W Series herunter. Garmin 500W Series 26 Seiten. Continued airworthiness
Auch für Garmin 500W Series: Nachtrag zum Pilotenhandbuch (24 seiten), Ergänzendes Flughandbuch (17 seiten), Nachtrag zum Pilotenhandbuch (50 seiten), Kurzreferenz (25 seiten), Anleitung Handbuch (11 seiten), Anleitung Handbuch (23 seiten)

The installed 400W Series equipment can be accessed as described below:

LRU Access: Bell models 407

1. GA 35/36/37 ANTENNA: FS84.0 for dual antenna installation; FS79.0 for single antenna installations.

Remove environmental seal, remove four antenna screws and lift the antenna enough to disconnect

antenna connector.

2. OVERHEAD CIRCUIT BREAKER PANEL: Access or remove by extracting the mounting screws along

the side of the circuit breaker panel.

3. CYCLIC CONTROL GRIPS: remove by extracting mounting screw at bottom of grip.

4. COOLING FAN: FS24.63 Access by removing 407-030-202-148 COVER, LOWER, RH. Remove two

screws, disconnect connector and air duct.

5. 400W SERIES UNIT: FS40 Access or remove by using a 3/32 allen head screwdriver to loosen the

locking mechanism through the access hole on the front of the unit. Note: location may vary slightly

depending whether or not a dual navigator system is installed.

400W Series

Instructions for Continued Airworthiness Bell 407

190-01226-14 Rev. 3

Page 9 of 26